Against idealistic beliefs in the problem-solving capacities of integrated resource management

Integrated resource management (IRM) is currently implemented in many parts of the world. This article promotes a pragmatic interpretation and suggests that idealistic beliefs in the problem-solving capacities of IRM are not justified. Successful implementation and performance of IRM are primarily a function of the historical context into which a project is placed. A comparative analysis of several case studies in Western Canada provides evidence for this argument, and the results can be summarized in a conceptual model about integration in resource management. IRM is interpreted as a process of constructing an objective reality of integration for sectorial management decisions, and this construction involves the transformations of power structures. This article suggests several pragmatic conclusions for IRM practice.     

Evaluation of Material Biodegradability in Real Conditions–Development of a Burial Test and an Analysis Methodology Based on Numerical Vision

This work validated a burial protocol for in situ testing and presents a robust, repeatable and time-saving technique to measure degraded areas in the sample, i.e. an image analysis method. 1440 specimens of degraded samples have been compiled in a data base. To this end, twenty samples presenting different levels of biodegradability (i.e. PHBV/HV, PLA, PCL, PCL-Starch, paper, PE, PE-Starch) were buried at 4 different locations and then disinterred at 4, 6, 9, 12, 18, and 24-month intervals. The biodegradation levels of these samples were determined by computing weight and area loss. Weight loss was measured after careful cleaning, whereas area loss was quantified using image analysis. Image analysis gives reliable information on visual pollution while only requiring a rudimentary and thus quicker cleaning of the samples.     

Fe-pillared clay as a Fenton-type heterogeneous catalyst for cinnamic acid degradation

Fe-pillared montmorillonite has been used as a Fenton-type heterogeneous catalyst for the removal of cinnamic acid in water. The influences of the cinnamic acid, catalyst and H2O2 concentrations and pH on the removal rate of cinnamic acid have been studied. The results show that the efficiency of Fe-pillared montmorillonite is higher than that of the Fe ions in the homogeneous phase, and less sensitive to pH.     

Existing oxidant/ozone standards in OECD countries

This paper describes the historical development and current legislation to control photochemical oxidant pollution in OECD countries. Policies for implementing, attaining, and maintaining ambient air quality standards or goals are discussed, problems associated with the various steps are highlighted, and the possibility of international policy guidelines which could control pollution across national frontiers is considered. To date, only a few countries have formulated ambient air quality standards for ozone/ oxidants; these standards are usually short-term averages over 1 h, ranging from 0.06 ppm (μL/L) in Japan to 0.12 ppm (μL/L) in the United States. The current interest in air quality management on an international scale leads to the conclusion that successful control of photochemical oxidant pollution would be best accomplished through the establishment of internationally acceptable standards or goals for oxidants/ozone based on health effects and other relevant environmental impacts, in combination with control strategies developed and implemented on an international level.     

Preliminary ecotoxicological characterization of a new energetic substance, CL-20

A new energetic substance hexanitrohexaazaisowurtzitane (or CL-20) was tested for its toxicities to various ecological receptors. CL-20 (epsilon-polymorph) was amended to soil or deionized water to construct concentration gradients. Results of Microtox (15-min contact) and 96-h algae growth inhibition tests indicate that CL-20 showed no adverse effects on the bioluminescence of marine bacteria Vibrio fischeri and the cell density of freshwater green algae Selenastrum capricornutum respectively, up to its water solubility (ca. 3.6 mg l(-1)). CL-20 and its possible biotransformation products did not inhibit seed germination and early seedling (16-19 d) growth of alfalfa (Medicago sativa) and perennial ryegrass (Lolium perenne) up to 10,000 mg kg(-1) in a Sassafras sandy loam soil (SSL). Indigenous soil microorganisms in SSL and a garden soil were exposed to CL-20 for one or two weeks before dehydrogenase activity (DHA) or potential nitrification activity (PNA) were assayed. Results indicate that up to 10,000 mg kg(-1) soil of CL-20 had no statistically significant effects on microbial communities measured as DHA or on the ammonium oxidizing bacteria determined as PNA in both soils. Data indicates that CL-20 was not acutely toxic to the species or microbial communities tested and that further studies are required to address the potential long-term environmental impact of CL-20 and its possible degradation products.     

Radon-222 signatures of natural ventilation regimes in an underground quarry

Radon-222 activity concentration has been monitored since 1999 in an underground limestone quarry located in Vincennes, near Paris, France. It is homogeneous in summer, with an average value of 1700 Bq m(-3), and varies from 730 to 1450 Bq m(-3) in winter, indicating natural ventilation with a rate ranging from 0.5 to 2.4 x 10(-6) s(-1) (0.04-0.22 day(-1)). This hypothesis is supported by measurements in the vertical access pit where, in winter, a turbulent air current produces a stable radon profile, smoothly decreasing from 700 Bq m(-3) at 20 m depth to 300 Bq m(-3) at surface. In summer, a thermal stratification is maintained in the pit, but the radon-222 concentration jumps repeatedly between 100 and 2000 Bq m(-3). These jumps are due to atmospheric pressure pumping, which induces ventilation in the quarry at a rate of about 0.1 x 10(-6) s(-1) (0.009 day(-1)). Radon-222 monitoring thus provides a dynamical characterisation of ventilation regimes, which is important for the assessment of the long-term evolution of underground systems.     

Photochemistry and photoinduced toxicity of acifluorfen, a diphenyl-ether herbicide

Photochemistry studies can be helpful in assessing the environmental fate of chemicals. Photochemical reactions lead to the formation of by-products that can exhibit different toxicological properties from the original compound. For this reason the photochemical behavior of the herbicide acifluorfen (5-[2-chloro-4-(trifluoromethyl)phenoxy]-2-nitrobenzoic acid) in the presence of different solvents was studied. Photochemical reactions were carried out using a high-pressure mercury arc and a solar simulator. Kinetic parameters and quantum yields were determined. The identification of photoproducts was performed by mass spectrometry and [1H] nuclear magnetic resonance (NMR). Nitrofluorfen, hydroxy-nitrofluorfen, 2-chloro-4-(trifluoromethyl)phenol, 5-trifluoromethyl-5'-nitrodibenzofuran, and other derivatives were identified. The photochemical reactions were also carried out in the presence of either a singlet or a triplet quencher, and in the presence of either a radical initiator or a radical inhibitor. Substances used as inhibitors of the excited levels T1 and S1 showed that photodegradation of acifluorfen begins from a singlet state S1 through a pi,pi* transition. The role of free radicals in the photodegradation of acifluorfen was determined and a radical mechanism was proposed. Toxicity tests against Daphnia magna Strauss showed that acifluorfen was not toxic at a concentration of 0.1 mM; however, photoproducts formed after 36 h of UV exposure of the herbicide induced a remarkable toxicity to the test organism.     

Linking stress with macroscopic and microscopic leaf response in trees: new diagnostic perspectives

Visible symptoms in tree foliage can be used for stress diagnosis once validated with microscopical analyses. This paper reviews and illustrates macroscopical and microscopical markers of stress with a biotic (bacteria, fungi, insects) or abiotic (frost, drought, mineral deficiency, heavy metal pollution in the soil, acidic deposition and ozone) origin helpful for the validation of symptoms in broadleaved and conifer trees. Differentiation of changes in the leaf or needle physiology, through ageing, senescence, accelerated cell senescence, programmed cell death and oxidative stress, provides additional clues raising diagnosis efficiency, especially in combination with information about the target of the stress agent at the tree, leaf/needle, tissue, cell and ultrastructural level. Given the increasing stress in a changing environment, this review discusses how integrated diagnostic approaches lead to better causal analysis to be applied for specific monitoring of stress factors affecting forest ecosystems.     

Effects of thermal desorption on the composition of two coking plant soils: impact on solvent extractable organic compounds and metal bioavailability

To evaluate the efficiency and the influence of thermal desorption on the soil organic compartment, contaminated soils from coking plant sites (NM and H) were compared to their counterparts treated with thermodesorption. The extractable organic matter, and the metal content and distribution with soil compartments were studied.In both thermodesorbed soils, PAH (polycyclic aromatic hydrocarbon) degradation exceeded 90%. However, the thermal desorption led not only to a volatilization of the organic compounds but also to the condensation of extractable organic matter.The treatments only affected the Fe and Zn distribution within the more stable fractions, whereas the organic compound degradation did not affect their mobility and availability.